Natural Bricks
Housing fireplace often spread of a refractory or high-quality red bricks. Housing fireplace is constructed of refractory bricks or red bricks of high quality – in this case, the firebox is better oblitsevat firebrick. Masonry walls shall have a thickness of not less than a half-brick. For building housing the fireplace, you can also use ceramic blocks, heat-resistant concrete or natural stone (except limestone and silica), depending on the the interior of your home, usually under fire adaptable interior room. "Facade" you can just plaster the fireplace or oblitsevat valuable varieties of stone. For building housing the fireplace, you can also use the natural stone (except limestone and silica), ceramic blocks, refractory concrete.
The surface of the shell veneer valuable species of artificial stone or plaster. You will also need to build the firebox. Its depth recommended to take about 0.5 m. At greater depths weakened the power of thermal radiation, at least – may get the smoke into the room. To achieve a better heat radiation top of the back wall of the spread of some tilt forward and the side walls – with an extension towards the hole. The walls of his most often spread from fireclay refractory bricks, the efficiency of the fireplace is 17%. Factor efficiency can be increased if the rear wall of the firebox oblitsevat sheet steel or cast-iron stove. Firebox floor to the most frequently used flame-retardant material – granite, brick, concrete.
To collect the ash and charcoal provide podzolnik, located under the firebox. Between the firebox and podzolnikom fit cast-iron grate. Basket made of steel with 10 .. 15 mm or section 10 … 10 … 15 x 15 mm. Elements of the basket have a 15 .. 20 mm.